OMNITRONIC TS-8 Isolator/Splitter
8-channel line isolator/splitter
Passive audio isolator/splitter for converting 6.3 mm jack (1/4") and RCA signals into balanced XLR signals or vice versa
Front inputs and outputs via RCA and 6.3 mm jacks (1/4") per channel
Rear inputs and outputs via balanced XLR jacks per channel
Eight high-performance audio transformers
Separate input and output signal grounds reduce hum
Frequency range 10-50000 Hz
Very clean and neutral sound
Incl. reversible mounting brackets for 483 mm rack installation (1 U)
Housing design: (19") 48,3 cm rack installation
Height unit: 1 HE
Passive audio isolator/splitter for converting 6.3 mm jack (1/4") and RCA signals into balanced XLR signals or vice versa
Front inputs and outputs via RCA and 6.3 mm jacks (1/4") per channel
Rear inputs and outputs via balanced XLR jacks per channel
Eight high-performance audio transformers
Separate input and output signal grounds reduce hum
Frequency range 10-50000 Hz
Very clean and neutral sound
Incl. reversible mounting brackets for 483 mm rack installation (1 U)
Housing design: (19") 48,3 cm rack installation
Height unit: 1 HE
Article code:
10304151
OEM:
0000000000444
Tax rate
22 %
Price with VAT:
287,95 €
We ship in 2-5 days
Split up and swarm out!
Clothes are often worn according to the occasion and for the different courses of a set meal, you will usually serve different wines. So far so good. But where is the connection to our new TS-8 Isolator/splitter then? Well, let us - for example - take a look at a concert of an orchestra that is broadcasted via radio. It is quite obvious, that the sound in the concert hall and the sound for the radio will be mixed in different ways - according to the environment. To cope with this task, the signal needs to be split so it can find its way to the mixer in the hall as well as to the sound truck outside. No problem for our 8 channel splitter. You are able to convert 1/4" and RCA signals into balanced XLR signals or vice versa, just according to the occasion. Furthermore it can impress with its very clean and neutral sound and the possibility to change the front into the backside - due to the reversible mounting brackets. Ain't that bad, right?
Clothes are often worn according to the occasion and for the different courses of a set meal, you will usually serve different wines. So far so good. But where is the connection to our new TS-8 Isolator/splitter then? Well, let us - for example - take a look at a concert of an orchestra that is broadcasted via radio. It is quite obvious, that the sound in the concert hall and the sound for the radio will be mixed in different ways - according to the environment. To cope with this task, the signal needs to be split so it can find its way to the mixer in the hall as well as to the sound truck outside. No problem for our 8 channel splitter. You are able to convert 1/4" and RCA signals into balanced XLR signals or vice versa, just according to the occasion. Furthermore it can impress with its very clean and neutral sound and the possibility to change the front into the backside - due to the reversible mounting brackets. Ain't that bad, right?
8-channel line isolator/splitter
- Passive audio isolator/splitter for converting 6.3 mm jack (1/4") and RCA signals into balanced XLR signals or vice versa
- Front inputs and outputs via RCA and 6.3 mm jacks (1/4") per channel
- Rear inputs and outputs via balanced XLR jacks per channel
- Eight high-performance audio transformers
- Separate input and output signal grounds reduce hum
- Frequency range 10-50000 Hz
- Very clean and neutral sound
- Incl. reversible mounting brackets for 483 mm rack installation (1 U)
- Housing design: (19") 48,3 cm rack installation
- Height unit: 1 HE
| Frequency range: | 10-50000 Hz, ±5 dB @ +4 dBu |
| THD: | 0.01% typical @ 0.1 kHz, + 18 dBu, <1% @ 100 Hz, + 24 dBu |
| Channel separation: | 90 dB typical |
| CMRR: 60 dB typical | |
| Phase error: | <5°, 20-20000 Hz |
| Insertation loss: | 0.4 dB @ 100 kohms |
| 5.5 dB @ 600 ohms | |
| Connection: | XLR, balanced |
| 6.3 mm jack (1/4"), balanced | |
| RCA stereo | |
| Dimensions: | 483 x 115 x 45 mm |
| Weight: | 2 kg |
| Height: | 4,45 cm |
| Depth: | 11,5 cm |
| Width: | 48,3 cm |
Related products
Kontakt:
☎ 040 320 310
📧 info@cerne-avbelj.com
