PSSO DDA-2500 Amplifier
Stereo PA amplifier with SMPS, 2 x 1250 W / 4 ohms
Stereo PA amplifier with class D circuitry
Low weight and height due to integrated switch mode power supply
Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, concerts)
Limiter and speaker switch-on delay
3 operating modes can be selected (stereo, parallel or bridged)
2 calibrated level controls for precise level adjustment
Input sensitivity adjustable
LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
Highly efficient front-to-rear air routing
Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
Speaker outputs via lockable Speaker plugs and screw terminals
Rugged steel chassis with aluminum front panel
Rack installation with 2 units
Housing design: (19") 48,3 cm rack installation
Height unit: 2 HE
Power supply of device: Mains Input Socket (M) P-Con (Power-In) fehlt provided
Stereo PA amplifier with class D circuitry
Low weight and height due to integrated switch mode power supply
Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, concerts)
Limiter and speaker switch-on delay
3 operating modes can be selected (stereo, parallel or bridged)
2 calibrated level controls for precise level adjustment
Input sensitivity adjustable
LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
Highly efficient front-to-rear air routing
Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
Speaker outputs via lockable Speaker plugs and screw terminals
Rugged steel chassis with aluminum front panel
Rack installation with 2 units
Housing design: (19") 48,3 cm rack installation
Height unit: 2 HE
Power supply of device: Mains Input Socket (M) P-Con (Power-In) fehlt provided
Article code:
10451685
OEM:
0000000001298
Tax rate
22 %
Price with VAT:
559,95 €
We ship in 2-5 days
Stereo PA amplifiers with up to 3.5kW of power
The stereo PA amplifiers of the DDA series with integrated limiter have been specially designed for stage and the disco applications. The amplifiers may be used in stereo operation, parallel operation or in mono bridge operation. All models employ a Class D architecture. Thanks to their switch mode power supply unit, the weight of the amplifiers is considerably lower than that of amplifiers of comparable power equipped with a standard power supply unit which makes them particularly attractive for rental companies. The amplifiers and the speakers connected are protected through extensive protective circuits.
The stereo PA amplifiers of the DDA series with integrated limiter have been specially designed for stage and the disco applications. The amplifiers may be used in stereo operation, parallel operation or in mono bridge operation. All models employ a Class D architecture. Thanks to their switch mode power supply unit, the weight of the amplifiers is considerably lower than that of amplifiers of comparable power equipped with a standard power supply unit which makes them particularly attractive for rental companies. The amplifiers and the speakers connected are protected through extensive protective circuits.
Stereo PA amplifier with SMPS, 2 x 1250 W / 4 ohms
- Stereo PA amplifier with class D circuitry
- Low weight and height due to integrated switch mode power supply
- Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, concerts)
- Limiter and speaker switch-on delay
- 3 operating modes can be selected (stereo, parallel or bridged)
- 2 calibrated level controls for precise level adjustment
- Input sensitivity adjustable
- LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
- Highly efficient front-to-rear air routing
- Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
- Speaker outputs via lockable Speaker plugs and screw terminals
- Rugged steel chassis with aluminum front panel
- Rack installation with 2 units
- Housing design: (19") 48,3 cm rack installation
- Height unit: 2 HE
- Power supply of device: Mains Input Socket (M) P-Con (Power-In) fehlt provided
| Power supply: | 100-240 V AC, 50/60 Hz |
| Power output (RMS): | |
| Stereo, parallel at 4 ohms | 2 x 1250 W |
| Stereo, parallel at 8 ohms | 2 x 700 W |
| 8 ohms bridged | 1 x 2500 W |
| Signal-to-Noise ratio: | >100 dB |
| Total harmonic distortion: | <0.15 % |
| Damping factor: | >500 |
| Voltage gain: | 39.7 dB |
| Slew rate: | >10 V/µsec |
| Input sensitivity: | 0.775 V/1.0 V/1.81 V bzw. 39.3 dB/37 dB/32 dB, switchable |
| Input impedance: | 20 kohms (balanced), 10 kohms (unbalanced) |
| Input connectors: | 4 x XLR |
| Output connectors: | 4 x Speaker, 4 x XLR feed-through output |
| Circuitry: | Class D |
| Protection: | Softstart, short-circuit, overheat, overload, clip limit, RF and VHF signals |
| Cooling: | 2 temperature-controlled fans, front-to-rear |
| Controls: | Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity |
| LED indicators: | protect, clip, - 5 dB, - 10 dB, - 20 dB (per channel) |
| Construction: | steel chassis, aluminum front |
| Dimensions: | 483 x 307 x 89 mm |
| Rack installation with 2 U | |
| Weight: | 6,25 kg |
| Power consumption: | 200 W 1/8 power |
| Frequency range: | 20 - 20000 Hz |
| Height: | 8,9 cm |
| Depth: | 30,7 cm |
| Width: | 48,3 cm |
| Power/channel (4 Ohm): | 1250 W |
Related products
Kontakt:
☎ 040 320 310
📧 info@cerne-avbelj.com
