PSSO QCA-10000 4-Channel SMPS Amplifier
PA amplifier with SMPS, 4 x 2150 W / 2 ohms, 4 x 2100 W / 4 ohms
4-channel PA amplifier with class I circuitry
4 x 2100 W/4 ohms
Low weight and height due to integrated switch mode power supply
Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
Speaker switch-on delay
3 operating modes can be selected (stereo, parallel or bridged)
4 level controls for precise level adjustment
Input sensitivity adjustable
LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
Highly efficient front-to-rear air routing
Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
Speaker outputs via lockable Speaker plugs
Rugged steel chassis with aluminum front panel
Rack installation with 2 units
Neutrik Speakon outputs
Height unit: 2 HE
Power supply of device: Fix fehlt
Housing design: (19") 48,3 cm rack installation
4-channel PA amplifier with class I circuitry
4 x 2100 W/4 ohms
Low weight and height due to integrated switch mode power supply
Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
Speaker switch-on delay
3 operating modes can be selected (stereo, parallel or bridged)
4 level controls for precise level adjustment
Input sensitivity adjustable
LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
Highly efficient front-to-rear air routing
Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
Speaker outputs via lockable Speaker plugs
Rugged steel chassis with aluminum front panel
Rack installation with 2 units
Neutrik Speakon outputs
Height unit: 2 HE
Power supply of device: Fix fehlt
Housing design: (19") 48,3 cm rack installation
Article code:
10451697
OEM:
0000000001342
Tax rate
22 %
Price with VAT:
2.039,95 €
We ship in 2-5 days
4-channel PA Amplifiers with Integrated SMPS
The 4-channel PA amplifiers of the QCA series offer ultra-high output power paired with a low weight and small overall height. The amplifiers use a patented second-generation Class I output circuitry which combines the high efficiency off Class D and the sound quality of Class A. Featuring a modern switch-mode power supply, the amplifiers provide up to 10 kW peak power and weigh less than 16 kg. This makes the series particularly attractive for mobile applications. The amplifiers can be used flexibly in stereo operation, parallel operation or in mono bridge operation. Extensive protective circuits will protect the amplifiers and the speakers connected.
The 4-channel PA amplifiers of the QCA series offer ultra-high output power paired with a low weight and small overall height. The amplifiers use a patented second-generation Class I output circuitry which combines the high efficiency off Class D and the sound quality of Class A. Featuring a modern switch-mode power supply, the amplifiers provide up to 10 kW peak power and weigh less than 16 kg. This makes the series particularly attractive for mobile applications. The amplifiers can be used flexibly in stereo operation, parallel operation or in mono bridge operation. Extensive protective circuits will protect the amplifiers and the speakers connected.
PA amplifier with SMPS, 4 x 2150 W / 2 ohms, 4 x 2100 W / 4 ohms
- 4-channel PA amplifier with class I circuitry
- 4 x 2100 W/4 ohms
- Low weight and height due to integrated switch mode power supply
- Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
- Speaker switch-on delay
- 3 operating modes can be selected (stereo, parallel or bridged)
- 4 level controls for precise level adjustment
- Input sensitivity adjustable
- LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
- Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
- Highly efficient front-to-rear air routing
- Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
- Speaker outputs via lockable Speaker plugs
- Rugged steel chassis with aluminum front panel
- Rack installation with 2 units
- Neutrik Speakon outputs
- Height unit: 2 HE
- Power supply of device: Fix fehlt
- Housing design: (19") 48,3 cm rack installation
Power supply: | 230 V AC, 50 Hz |
Power output (RMS): | |
2 ohms | 4 x 2500 W |
4 ohms | 4 x 2100 W |
8 ohms | 4 x 1300 W |
4 ohms bridged | 2 x 5000 W |
8 ohms bridged | 2 x 4200 W |
Signal-to-Noise ratio: | >80 dB |
Total harmonic distortion: | <0.05 % |
Damping factor: | >800 |
Slew rate: | >10 V/µsec |
Crosstalk: | >65 dB |
Input sensitivity: | 0.775 V/1.0 V/1.4 V/38 dB/32 dB/26 dB, switchable |
Voltage gain: | 40.3 dB (0.775 V), 38 dB (1.0 V), 35.1 dB (1.4 V) |
Input impedance: | 20 kohms (balanced), 10 kohms (unbalanced) |
Input connectors: | 4 x XLR |
Output connectors: | 4 x Speaker, 4 x XLR feed-through output |
Protection: | Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals |
Cooling: | 2 temperature-controlled fans, front-to-rear |
Controls: | Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity |
LED indicators: | Protect, clip, signal (per channel) |
Construction: | Steel chassis, aluminum front panel |
Dimensions: | 483 x 445 x 89 mm |
Rack installation with 2 U | |
Power consumption: | 1150,00 W 1/8 power |
Weight: | 13,90 kg |
Power/channel (8 Ohm): | 1300 W |
Power/channel (4 Ohm): | 2100 W |
Frequency range: | 20 - 20000 Hz |
Height: | 8,9 cm |
Depth: | 44,5 cm |
Width: | 48,3 cm |
Related products
Kontakt:
☎ 040 320 310
📧 info@cerne-avbelj.com