OMNITRONIC MPZ-250.6 PA Mixing Amplifier
OMNITRONIC MPZ-250.6 PA Mixing Amplifier
OMNITRONIC MPZ-250.6 PA Mixing Amplifier
OMNITRONIC MPZ-250.6 PA Mixing Amplifier
OMNITRONIC MPZ-250.6 PA Mixing Amplifier
OMNITRONIC MPZ-250.6 PA Mixing Amplifier
OMNITRONIC MPZ-250.6 PA Mixing Amplifier
OMNITRONIC MPZ-250.6 PA Mixing Amplifier
OMNITRONIC MPZ-250.6 PA Mixing Amplifier
OMNITRONIC MPZ-250.6 PA Mixing Amplifier

OMNITRONIC MPZ-250.6 PA Mixing Amplifier

6-zone PA mono mixing amplifier, 250 watts, zones switchable
Comfortable control of PA speakers via 6-zone technology
6 PA zone outputs, independently switchable on the front panel
Master PA output (70 V and 100 V)
Output for low-impedance speakers (4-16 ohms)
2 rear microphone inputs (6.3 mm jack, unbal.)
1 front microphone input (combination XLR/6.3 mm jack, unbal.) with adjustable priority circuit
All microphone inputs with separate level controls
3 line inputs (stereo RCA) with separate level controls
1 line output (stereo RCA)
Chime, switchable
Treble and bass control for the output signal
7-fold LED level display
Master control for the output signal
Fan-cooled
Protection circuits with LED indication: over current, short circuit, turn-on delay
Rack installation, brackets detachable
Master equalizer: 1 x 2 band tone control Mono
Housing design: (19") 48,3 cm rack installation
Power supply of device: Fix fehlt
Height unit: 2 HE
Article code:
80709731
OEM:
0000000071161
Tax rate
22 %
Price with VAT:
489,95 €
We ship in 2-5 days
ADD TO CART
Enormous reliability with a maximum of flexibility

The Omnitronic MPZ-250.6 ELA mixer amplifier is your reliable partner for ELA sound reinforcement systems. Thanks to its 19" format, it is ideally suited for both mobile and permanent installations.
Outputs for ELA loudspeakers with 70 V and 100 V audio transformers or 4-16- Ohm loudspeakers leave nothing to be desired. In addition, you can also connect a device with line level (e.g. mixing console) to the line output. With 6 mixable inputs you are always flexible. Connect up to 3 microphones and 3 line level devices.

Control your ELA speakers conveniently via the 6 zone outputs of the MPZ-250.6. They can be switched separately on the front panel. For you, this means the greatest possible adaptability when implementing your sound reinforcement concept.


Make yourself heard!

The microphone input at the front has an adjustable priority switch. It allows you to make important announcements with automatic, continuously adjustable level reduction of all signals. You can also use the gong to draw attention to your announcement.

Protective functions

A fan protects the interior of your MPZ-250.6 from overheating. In addition to a switch-on delay, it has protection circuits against overvoltage and short-circuits. In these cases, your loudspeakers are electrically isolated from the amplifier. This protects both the MPZ-250.6 and your speakers from damage.


6-zone PA mono mixing amplifier, 250 watts, zones switchable

  • Comfortable control of PA speakers via 6-zone technology
  • 6 PA zone outputs, independently switchable on the front panel
  • Master PA output (70 V and 100 V)
  • Output for low-impedance speakers (4-16 ohms)
  • 2 rear microphone inputs (6.3 mm jack, unbal.)
  • 1 front microphone input (combination XLR/6.3 mm jack, unbal.) with adjustable priority circuit
  • All microphone inputs with separate level controls
  • 3 line inputs (stereo RCA) with separate level controls
  • 1 line output (stereo RCA)
  • Chime, switchable
  • Treble and bass control for the output signal
  • 7-fold LED level display
  • Master control for the output signal
  • Fan-cooled
  • Protection circuits with LED indication: over current, short circuit, turn-on delay
  • Rack installation, brackets detachable
  • Master equalizer: 1 x 2 band tone control Mono
  • Housing design: (19") 48,3 cm rack installation
  • Power supply of device: Fix fehlt
  • Height unit: 2 HE


Power supply:230 V AC, 50 Hz
Output type:70 V, 100 V or 4-16 ohms
Output current:3.6 A (70 V), 2.5 A (100 V)
Mic inputs:5 mV, 600 ohms
Line inputs:300 mV, 10 kohms
Speaker connectors:Screw connectors, terminal block
Distortion:0.5 % (1 kHz)
S/N ratio:85 dB (line), 75 dB (mic)
Weight:14 kg
Impedance:100 V ELA
Power consumption:500,00 W
Output power:250 W RMS
Height:8,9 cm
Depth:38,5 cm
Width:48,3 cm
Frequency range:80 - 16000 Hz

Related products

    Kontakt:

    ☎  040 320 310

    📧 info@cerne-avbelj.com

     

     

    Related products

      Cookie - Analitics
      They are used to record the website's obscurity analysis and provide us with data to provide a better user experience.
      Cookie - social
      Cookies required for plug-ins for sharing content from social media sites.
      Cookie - chat
      Cookies allow you to sign up, contact and communicate through the communication plug-in on the page.
      Cookie - marketing
      They target targeted advertising based on past user's activity on other sites.
      What are cookies?
      By visiting and using the site, you consent to the use and recording of cookies.OK Learn more about cookies