MADRIX USB Contact Closure
MADRIX I/O products are supplementary input and output devices for the MADRIX software
External equipment, such as sensors, bring additional automation processes and interaction to any LED project using MADRIX software
This digital input device registers if its circuit is either open or closed. In most cases, it is used to build a switch or trigger
Incoming values are directly translated into DMX data in the MADRIX software
The small unit can simply be connected to any USB 2.0 port
Example of use: Strobe or Blackout
MADRIX I/O requires MADRIX 3. Please update at least to MADRIX 3.4.
Package Contents: 1x MADRIX USB contact closure, 1x Quick start guide
Free software demo version, user manuals, and more information available at www.madrix.com
Made in Germany
PC connect: USB
Power supply of device: Fix fehlt
Control: Can be controlled via Madrix
External equipment, such as sensors, bring additional automation processes and interaction to any LED project using MADRIX software
This digital input device registers if its circuit is either open or closed. In most cases, it is used to build a switch or trigger
Incoming values are directly translated into DMX data in the MADRIX software
The small unit can simply be connected to any USB 2.0 port
Example of use: Strobe or Blackout
MADRIX I/O requires MADRIX 3. Please update at least to MADRIX 3.4.
Package Contents: 1x MADRIX USB contact closure, 1x Quick start guide
Free software demo version, user manuals, and more information available at www.madrix.com
Made in Germany
PC connect: USB
Power supply of device: Fix fehlt
Control: Can be controlled via Madrix
Šifra:
51860382
OEM:
0000000050555
Stopnja davka
22 %
Cena z DDV:
89,13 €
Odpošljemo v 2 - 5 dneh
MADRIX I/O products are supplementary input and output devices for the MADRIX software
- External equipment, such as sensors, bring additional automation processes and interaction to any LED project using MADRIX software
- This digital input device registers if its circuit is either open or closed. In most cases, it is used to build a switch or trigger
- Incoming values are directly translated into DMX data in the MADRIX software
- The small unit can simply be connected to any USB 2.0 port
- Example of use: Strobe or Blackout
- MADRIX I/O requires MADRIX 3. Please update at least to MADRIX 3.4.
- Package Contents: 1x MADRIX USB contact closure, 1x Quick start guide
- Free software demo version, user manuals, and more information available at www.madrix.com
- Made in Germany
- PC connect: USB
- Power supply of device: Fix fehlt
- Control: Can be controlled via Madrix
| Power: | DC 5 V, 500 mA, Power over USB |
| Power consumption: | ~ 25 mA during normal operation |
| USB: | USB 2.0, type B plug, Plug and Play |
| Case: | IP30 |
| Dimensions (L x W x H): | 44 mm x 30 mm x 23 mm |
| Temperature range: | -20 °C to 80 °C (Operating / Storage) |
| Height: | 2,3 cm |
| Depth: | 4,4 cm |
| Width: | 3 cm |
| Weight: | 0,064 kg |
Sorodni izdelki
Kontakt:
☎ 040 320 310
📧 info@cerne-avbelj.com
