LED Moving Head FUTURELIGHT DMH-200

PRO beam/wash Moving Head with 200 W COB LED and large zoom

• Equipped with a powerful white 200 W COB LED
• Upgrade via optional wireless receiver module for WDMX operation (Wireless Solution - made in Sweden)
• Supports RDM (Remote Device Management)
• 15, 17, 24 or 25 DMX channels selectable
• Effect wheel with rotating 3-facet prism
• Color wheel with 8 different dichroic color filters plus white
• Rainbow effect with adjustable speed in both directions
• Gobo wheel with 7 rotating gobos plus open
• All rotating gobos can be interchanged
• Slot-in gobo system for exchanging gobos without tools
• With gobo shake function
• Gobo wheel 2 with 7 static gobos plus open
• Exact positioning via 16 bit PAN/TILT movement resolution
• Motorized focus
• Autofocus
• Motorized zoom with 7.5 - 40° beam angle
• Steplessly adjustable iris
• Stepless frost-filter
• Dimmer
• Strobe effect with adjustable speed
• Random strobe effect
• Automatic position correction
• PAN angle switchable between 540° and 630°
• Sound-controlled via built-in microphone
• Control board with graphic LCD and foil-keyboard for adjusting the DMX-starting address, PAN/TILT reverse, reset
• DMX-controlled operation or stand-alone operation with Master/Slave function
• The scenes can be modified via the Control Board or via an external controller and loaded into the memory
• Number of scenes can be changed individually
• Software upload by optional accessories via DMX link
• Power connection via Neutrik PowerCon jack and included power cable
• Feed-through output allows to power up to 8 devices
• ESDC function (Easy Service Data Check) with battery-buffered control board for operation time readouts etc. (the Li-Ion battery 3.7V, AAA, 10440 is not included)
• Switch-mode power supply for operation between 100 and 240 volts
• DMX control via every standard DMX controller
• Effect: gobo effect; Single Beam
• Equipment: Gobos rotating; Gobos static; Prisma 3-fold; Iris; Focus motor-driven; Zoom motor-driven; Frost filter
• Projection: flickerfree
• Power out: 1 x
• Power supply of device: Mains Input Socket (M) Powercon (Power-In) blue fehlt provided
• Control: WDMX upgradeable optional; Stand-alone; DMX; RDM
• LED: 1 x COB chip-on-board 200 W Colour wheel