TCM FX E-Shot
Šifra:
51708000
OEM:
0000000045605
Stopnja davka
22 %
Cena z DDV:
274,95 €
Odpošljemo v 2 - 5 dneh
The Confettimaker's E-Shot is an easy-to-use electric confetti shooter. The shooter is designed to fire prefilled single-use electric cannons, which are available in 40 cm and 80 cm length. Confetti or streamers in various colours, even UV and metallic colors are available. The cannons contain a pressurized nitrogen cartridge which launches confetti up to 12 meters and streamers even up to 20 meters wide.
The E-Shot will be activated by a 230V power source and can therefore be operated very easy by a 230V power switch like the The Confettimaker FX-Control (51708250). If you like to operate by DMX you can use a The Confettimaker DMX Switchpack (51708260, 51708265) in combination with a any DMX controller.
The E-Shot will be activated by a 230V power source and can therefore be operated very easy by a 230V power switch like the The Confettimaker FX-Control (51708250). If you like to operate by DMX you can use a The Confettimaker DMX Switchpack (51708260, 51708265) in combination with a any DMX controller.
Electric firing unit for confetti and streamers
- The electric shooter can be used for confetti or streamer cannons
- Push the button to shoot the confetti up to 12 meters and streamers up 20 meters!
- Suitable for TCM FX electric cannons with 40 and 80 cm length
- The shooting angle can be adjusted steplessly
- Activated by a 230V power source
- We recommend TCM FX FX-Control (No. 51708250) for the comfortable control of up to four channels
- DMX control via any standard DMX controller and TCM FX DMX Switchpack I (No. 51708260) or TCM FX DMX Switchpack II (No. 51708265) (DMX control only possible with switchpack)
- For the ground or stage installation we recommend the TCM FX Groundplate (No. 51708300) oder die TCM FX Groundplate XL (No. 51708302) for four units
- For truss installation we recommend the TCM FX Twenty Clamp (No. 51708310) or the TCM FX Quick Trigger Clamp (No. 51708312) and the TCM FX E-Shot Cannon Clamp with safety rope (No. 51708314) for securing the cannon
- PowerCon power input and feed-through output to power up further devices
- Made in Europe
- Use: Machine
- Power supply of device: Mains Input Socket (M) Powercon (Power-In) blue
- Power out: 1 x; 1 x Special connector recessed mounting
- Control: without
| Power supply: | 230 V AC, 50 Hz |
| Shooting angle: | 0-180° |
| Dimensions (L x W x H): | 130 x 120 x 200 mm |
| Weight: | 1,78 kg |
| Power consumption: | 100 W |
| Height: | 16 cm |
| Depth: | 13 cm |
| Width: | 12 cm |
Sorodni izdelki
Kontakt:
☎ 040 320 310
📧 info@cerne-avbelj.com
