EUROLITE LED Strobe COB PRO 16x10W DMX
Strobe with 16 x 10 W COB LED and adjustable flash freuquency
Operable in stand-alone mode with Master/Slave function or DMX interface
DMX512 control possible via any commercial DMX controller
Sound control via built-in microphone
Microphone sensitivity adjustable via control board
Brightness and flash-rate steplessly adjustable
Comfortable addressing and setting via control board with LED display and four operating buttons
Switch-mode power supply for operation between 100 and 240 volts
Elaborate reflector system
Compact housing with mounting bracket and fixation screws
Equipped with sixteen powerful 10 W COB LEDs
Ready for connection via included IEC power cord with safety power plug
Strobe color: White
Effect: Strobe effect
Power supply of device: Fix fehlt
Control: Stand-alone; DMX
LED: 16 x COB chip-on-board 10 W CW Homogenous colormix
Operable in stand-alone mode with Master/Slave function or DMX interface
DMX512 control possible via any commercial DMX controller
Sound control via built-in microphone
Microphone sensitivity adjustable via control board
Brightness and flash-rate steplessly adjustable
Comfortable addressing and setting via control board with LED display and four operating buttons
Switch-mode power supply for operation between 100 and 240 volts
Elaborate reflector system
Compact housing with mounting bracket and fixation screws
Equipped with sixteen powerful 10 W COB LEDs
Ready for connection via included IEC power cord with safety power plug
Strobe color: White
Effect: Strobe effect
Power supply of device: Fix fehlt
Control: Stand-alone; DMX
LED: 16 x COB chip-on-board 10 W CW Homogenous colormix
Šifra:
52200878
OEM:
0000000054492
Stopnja davka
22 %
Cena z DDV:
361,95 €
Odpošljemo v 2 - 5 dneh
This LED strobe is equipped with 16 x 10-watt cold white COB LEDs and combines strobe, chase and blinder effects. It lets you create both dynamic stage shows and the more low-key effects in between with a single fixture.
You can choose from three different operation modes: master-slave, stand-alone and DMX mode (5 DMX channels). The integrated microphone makes for great light effects to the rhythm of the music.
The fixture has 3-pin DMX connectors as well as an IEC input to connect it to the mains.
You can choose from three different operation modes: master-slave, stand-alone and DMX mode (5 DMX channels). The integrated microphone makes for great light effects to the rhythm of the music.
The fixture has 3-pin DMX connectors as well as an IEC input to connect it to the mains.
Strobe with 16 x 10 W COB LED and adjustable flash freuquency
- Operable in stand-alone mode with Master/Slave function or DMX interface
- DMX512 control possible via any commercial DMX controller
- Sound control via built-in microphone
- Microphone sensitivity adjustable via control board
- Brightness and flash-rate steplessly adjustable
- Comfortable addressing and setting via control board with LED display and four operating buttons
- Switch-mode power supply for operation between 100 and 240 volts
- Elaborate reflector system
- Compact housing with mounting bracket and fixation screws
- Equipped with sixteen powerful 10 W COB LEDs
- Ready for connection via included IEC power cord with safety power plug
- Strobe color: White
- Effect: Strobe effect
- Power supply of device: Fix fehlt
- Control: Stand-alone; DMX
- LED: 16 x COB chip-on-board 10 W CW Homogenous colormix
Power supply: | 100-240 V AC, 50/60 Hz |
DMX channels: | 5 |
DMX connection: | 3-pin XLR |
Sound-control: | via built-in microphone |
LED type: | 10 W COB, white |
LED number: | 16 |
Dimensions: | 88 x 365 x 220 mm |
Weight: | 2,6 kg |
Power consumption: | 165 W |
Lamp type: | LED |
Height: | 22 cm |
Depth: | 8,8 cm |
DMX channels: | 5 |
Width: | 36,5 cm |
Ecodesign regulation: | Yes |
Sorodni izdelki
Kontakt:
☎ 040 320 310
📧 info@cerne-avbelj.com