EUROLITE LC-1 LED Strip RGB Controller
Control unit for RGB LED strips
Control unit for RGB LED strips (12 V and 24 V versions)
3 separate control channels for individual color mixing of red, green and blue LEDs
Automatic color change or manual or color selection
Adjustable program speed and brightness
4 built-in programs (running light, flash, color fadings), with pause function
Screw terminals for connecting the LED strips
Screw terminals for connecting a 12 V or 24 V PSU (not included)
Control unit for RGB LED strips (12 V and 24 V versions)
3 separate control channels for individual color mixing of red, green and blue LEDs
Automatic color change or manual or color selection
Adjustable program speed and brightness
4 built-in programs (running light, flash, color fadings), with pause function
Screw terminals for connecting the LED strips
Screw terminals for connecting a 12 V or 24 V PSU (not included)
Šifra:
50530555
OEM:
0000000039970
Stopnja davka
22 %
Cena z DDV:
95,08 €
Odpošljemo v 2 - 5 dneh
Gives variety!
Not to put too fine a point to it, shining LED Ribbons really produce a great effect. But do you also want a little bit more than just static shining sometimes? If that is the case, then you should take a close look at our LED Ribbon RGB controller which gives variety not only due to its four programs. You are also able to stop and activate the color-fade-program just as you wish and you can adjust the speed and the brightness of the LED-Ribbons.
Not to put too fine a point to it, shining LED Ribbons really produce a great effect. But do you also want a little bit more than just static shining sometimes? If that is the case, then you should take a close look at our LED Ribbon RGB controller which gives variety not only due to its four programs. You are also able to stop and activate the color-fade-program just as you wish and you can adjust the speed and the brightness of the LED-Ribbons.
Control unit for RGB LED strips
- Control unit for RGB LED strips (12 V and 24 V versions)
- 3 separate control channels for individual color mixing of red, green and blue LEDs
- Automatic color change or manual or color selection
- Adjustable program speed and brightness
- 4 built-in programs (running light, flash, color fadings), with pause function
- Screw terminals for connecting the LED strips
- Screw terminals for connecting a 12 V or 24 V PSU (not included)
| Power supply: | 12-24 V DC |
| Standby current: | <1 W |
| Output power: max. 180 W (12 V), 280 W (24 V) | |
| Output current: | max. 5 A per channel (15 A total) |
| Dimensions (L x W x H): | 211 x 40 x 30 mm |
| Weight: | 0,3 kg |
| Height: | 3 cm |
| Depth: | 21,1 cm |
| Width: | 4 cm |
Sorodni izdelki
Kontakt:
☎ 040 320 310
📧 info@cerne-avbelj.com
