OMNITRONIC PAP-60 PA Amplifier
PA power amplifier, 60 watts
1 line input (optionally XLR or 6.3 mm jack)
1 feed-through output (optionally XLR or 6.3 mm jack)
70 V, 100 V or 4-16 ohms operation
Master control
LED indicators for power, signal, clip and fault
Protective circuits: over load, short circuit, turn-on delay, over heating, DC offset protection
Load detection and power control
Rack installation
Housing design: (19") 48,3 cm rack installation
Height unit: 2 HE
Power supply of device: Fix fehlt
1 line input (optionally XLR or 6.3 mm jack)
1 feed-through output (optionally XLR or 6.3 mm jack)
70 V, 100 V or 4-16 ohms operation
Master control
LED indicators for power, signal, clip and fault
Protective circuits: over load, short circuit, turn-on delay, over heating, DC offset protection
Load detection and power control
Rack installation
Housing design: (19") 48,3 cm rack installation
Height unit: 2 HE
Power supply of device: Fix fehlt
Šifra:
80709804
OEM:
0000000071307
Stopnja davka
22 %
Cena z DDV:
219,95 €
Odpošljemo v 2 - 5 dneh
Reliable amplifier
The Omnitronic PAP-60 ELA mixer amplifier is your reliable partner for ELA sound reinforcement systems. Thanks to its 19" format, it is ideal for both mobile and fixed installations.
Outputs for ELA loudspeakers with 70 V and 100 V audio carriers or 4-16- ? loudspeakers leave nothing to be desired. In addition to a line input, the PAP-60 also offers a loop-through output. Choose between XLR and 6.3 mm jack for both. So you're always flexible.
Protection
A fan protects the interior of your PAP-60 from overheating. In addition to a switch-on delay, it also features protection circuits against overload, short-circuit and DC voltage. In these cases, your loudspeakers are electrically isolated from the amplifier. Both the PAP-60 and your speakers are protected from damage.
The Omnitronic PAP-60 ELA mixer amplifier is your reliable partner for ELA sound reinforcement systems. Thanks to its 19" format, it is ideal for both mobile and fixed installations.
Outputs for ELA loudspeakers with 70 V and 100 V audio carriers or 4-16- ? loudspeakers leave nothing to be desired. In addition to a line input, the PAP-60 also offers a loop-through output. Choose between XLR and 6.3 mm jack for both. So you're always flexible.
Protection
A fan protects the interior of your PAP-60 from overheating. In addition to a switch-on delay, it also features protection circuits against overload, short-circuit and DC voltage. In these cases, your loudspeakers are electrically isolated from the amplifier. Both the PAP-60 and your speakers are protected from damage.
PA power amplifier, 60 watts
- 1 line input (optionally XLR or 6.3 mm jack)
- 1 feed-through output (optionally XLR or 6.3 mm jack)
- 70 V, 100 V or 4-16 ohms operation
- Master control
- LED indicators for power, signal, clip and fault
- Protective circuits: over load, short circuit, turn-on delay, over heating, DC offset protection
- Load detection and power control
- Rack installation
- Housing design: (19") 48,3 cm rack installation
- Height unit: 2 HE
- Power supply of device: Fix fehlt
Power supply: | 230 V AC, 50 Hz |
Output power: | 60 W RMS |
Output current: | 0.85 A/ 70 V, 0.6 A/ 100 V |
Speaker outputs: | 70 V, 100 V or 4-16 ohms |
Input connectors: | XLR, 6.3 mm jack mounting socket |
Output connectors: | XLR, 6.3 mm jack mounting socket |
Line input: | 800 mV, 10 kohms |
Distortion: | 0.5 %/ 1 kHz |
S/N ratio (line): | 90 dB |
Protection: | Overheat, overload, short-circuit, DC, softstart |
Indicators: | Power, fault, clip, signal |
Dimensions: | 483 x 335 x 92 mm |
Rack installation with 2 U | |
Weight: | 8,5 kg |
Output power: | 60 W RMS |
Frequency range: | 60 - 16000 Hz |
Height: | 8,9 cm |
Depth: | 38,5 cm |
Width: | 48,3 cm |
Impedance: | 100 V ELA |
Sorodni izdelki
Kontakt:
☎ 040 320 310
📧 info@cerne-avbelj.com