MADRIX NEBULA
USB and Artnet interface to control pixels of LED strips, LED stripes, and LED tape
MADRIX NEBULA is a hardware interface to control your digital LED strips, LED stripes, and LED tape
It is an advanced SPI converter and LED pixel tape driver
Supports a wide range of LEDs: APA101 / APA102 / APA104 / APA106 / GW6201 / GW6205 / LPD1882S / LPD6803 / LPD8806 / MBI6120 / P9883 / SJ1221 / SK6812 / SK6822 / SM16703 / SM16716 / TLS3001 / TLS3008 / TM1804 / TM1809 / TM1812 / TM1814 / TM1829 / UCS1903 / UCS512B3, UCS8904, UCS9812S, WS2801 / WS2803 / WS2811 / WS2811S / WS2812 / WS2812B / WS2813 / WS2815 / WS2818 / WS2822S / WS2822S Addressing (As of July 2018)
Additional LED types will be supported with future firmware updates
Drives up to 1360 RGB pixels (8 DMX universes / 4096 DMX Channels / 4096 single-color pixels / 1024 RGBW pixels) distributed equally over 2 ports
Supports a signal frequency of up to 24 MHz
The output protocol can be set separately for each of the 2 ports
Directly connects to the LEDs via 4-pin screw terminals
Provides flexible power options: over USB (5 V) or via screw terminal (5 V to 24 V / 12 A) as well as routing through to LEDs with up to 6 A maximum load per port with various options on how to connect LEDs, power, and MADRIX NEBULA
Receives data over Ethernet network (Art-Net and/or Streaming ACN)
Can also be used as MADRIX USB interface
Works great with the MADRIX Software (sold separately) with quick and easy installation
Sync Mode: MADRIX Software and hardware allow you to synchronize Art-Net data for all output ports and even across multiple devices to get an optimal image on the LEDs without visual interruptions
Complies with the official specifications of Art-Net and Streaming ACN and can be used as regular network unit with other 3rd-party consoles, controllers, or software solutions
Automatic HTP merging for two Art-Net sources
2 Ethernet ports with daisy chain support for the data connection without using a separate network switch or router
Useful settings for channels per universe, start channel, channel order, and output in case of connection loss, and more
9 status LEDs, which can be turned off
Built-in web page for simple on-device configuration
Can be mounted on 35 mm DIN rails or walls via the provided wall mount brackets
Non-conductive enclosure with IP20 and UL94 V-O flammability rating
Fanless, noiseless, and low-energy design
Ready within seconds after startup
Recommended for any small or large project
Multiple devices can be used together without problems
The firmware is upgradable for future features
Quick start guide / technical manual available in English and German
User manuals also available at help.madrix.com
Made in Germany
More information available at www.madrix.com
Made in Germany
Power supply of device: Mains Input Socket (M) fehlt provided
Controller useable for: fehlt
MADRIX NEBULA is a hardware interface to control your digital LED strips, LED stripes, and LED tape
It is an advanced SPI converter and LED pixel tape driver
Supports a wide range of LEDs: APA101 / APA102 / APA104 / APA106 / GW6201 / GW6205 / LPD1882S / LPD6803 / LPD8806 / MBI6120 / P9883 / SJ1221 / SK6812 / SK6822 / SM16703 / SM16716 / TLS3001 / TLS3008 / TM1804 / TM1809 / TM1812 / TM1814 / TM1829 / UCS1903 / UCS512B3, UCS8904, UCS9812S, WS2801 / WS2803 / WS2811 / WS2811S / WS2812 / WS2812B / WS2813 / WS2815 / WS2818 / WS2822S / WS2822S Addressing (As of July 2018)
Additional LED types will be supported with future firmware updates
Drives up to 1360 RGB pixels (8 DMX universes / 4096 DMX Channels / 4096 single-color pixels / 1024 RGBW pixels) distributed equally over 2 ports
Supports a signal frequency of up to 24 MHz
The output protocol can be set separately for each of the 2 ports
Directly connects to the LEDs via 4-pin screw terminals
Provides flexible power options: over USB (5 V) or via screw terminal (5 V to 24 V / 12 A) as well as routing through to LEDs with up to 6 A maximum load per port with various options on how to connect LEDs, power, and MADRIX NEBULA
Receives data over Ethernet network (Art-Net and/or Streaming ACN)
Can also be used as MADRIX USB interface
Works great with the MADRIX Software (sold separately) with quick and easy installation
Sync Mode: MADRIX Software and hardware allow you to synchronize Art-Net data for all output ports and even across multiple devices to get an optimal image on the LEDs without visual interruptions
Complies with the official specifications of Art-Net and Streaming ACN and can be used as regular network unit with other 3rd-party consoles, controllers, or software solutions
Automatic HTP merging for two Art-Net sources
2 Ethernet ports with daisy chain support for the data connection without using a separate network switch or router
Useful settings for channels per universe, start channel, channel order, and output in case of connection loss, and more
9 status LEDs, which can be turned off
Built-in web page for simple on-device configuration
Can be mounted on 35 mm DIN rails or walls via the provided wall mount brackets
Non-conductive enclosure with IP20 and UL94 V-O flammability rating
Fanless, noiseless, and low-energy design
Ready within seconds after startup
Recommended for any small or large project
Multiple devices can be used together without problems
The firmware is upgradable for future features
Quick start guide / technical manual available in English and German
User manuals also available at help.madrix.com
Made in Germany
More information available at www.madrix.com
Made in Germany
Power supply of device: Mains Input Socket (M) fehlt provided
Controller useable for: fehlt
Article code:
51860360
OEM:
0000000050500
Tax rate
22 %
Price with VAT:
427,21 €
We ship in 2-5 days
USB and Artnet interface to control pixels of LED strips, LED stripes, and LED tape
- MADRIX NEBULA is a hardware interface to control your digital LED strips, LED stripes, and LED tape
- It is an advanced SPI converter and LED pixel tape driver
- Supports a wide range of LEDs: APA101 / APA102 / APA104 / APA106 / GW6201 / GW6205 / LPD1882S / LPD6803 / LPD8806 / MBI6120 / P9883 / SJ1221 / SK6812 / SK6822 / SM16703 / SM16716 / TLS3001 / TLS3008 / TM1804 / TM1809 / TM1812 / TM1814 / TM1829 / UCS1903 / UCS512B3, UCS8904, UCS9812S, WS2801 / WS2803 / WS2811 / WS2811S / WS2812 / WS2812B / WS2813 / WS2815 / WS2818 / WS2822S / WS2822S Addressing (As of July 2018)
- Additional LED types will be supported with future firmware updates
- Drives up to 1360 RGB pixels (8 DMX universes / 4096 DMX Channels / 4096 single-color pixels / 1024 RGBW pixels) distributed equally over 2 ports
- Supports a signal frequency of up to 24 MHz
- The output protocol can be set separately for each of the 2 ports
- Directly connects to the LEDs via 4-pin screw terminals
- Provides flexible power options: over USB (5 V) or via screw terminal (5 V to 24 V / 12 A) as well as routing through to LEDs with up to 6 A maximum load per port with various options on how to connect LEDs, power, and MADRIX NEBULA
- Receives data over Ethernet network (Art-Net and/or Streaming ACN)
- Can also be used as MADRIX USB interface
- Works great with the MADRIX Software (sold separately) with quick and easy installation
- Sync Mode: MADRIX Software and hardware allow you to synchronize Art-Net data for all output ports and even across multiple devices to get an optimal image on the LEDs without visual interruptions
- Complies with the official specifications of Art-Net and Streaming ACN and can be used as regular network unit with other 3rd-party consoles, controllers, or software solutions
- Automatic HTP merging for two Art-Net sources
- 2 Ethernet ports with daisy chain support for the data connection without using a separate network switch or router
- Useful settings for channels per universe, start channel, channel order, and output in case of connection loss, and more
- 9 status LEDs, which can be turned off
- Built-in web page for simple on-device configuration
- Can be mounted on 35 mm DIN rails or walls via the provided wall mount brackets
- Non-conductive enclosure with IP20 and UL94 V-O flammability rating
- Fanless, noiseless, and low-energy design
- Ready within seconds after startup
- Recommended for any small or large project
- Multiple devices can be used together without problems
- The firmware is upgradable for future features
- Quick start guide / technical manual available in English and German
- User manuals also available at help.madrix.com
- Made in Germany
- More information available at www.madrix.com
- Made in Germany
- Power supply of device: Mains Input Socket (M) fehlt provided
- Controller useable for: fehlt
| Power supply: | DC 5 V - 24 V, A) via 2-pin screw terminal (12 A max.), B) via 5 V USB, C) via Port 1 or 2 sourced from LEDs; 6 A max. load per port when supplying through to LEDs |
| Power consumption: | < 1.5 W during normal operation (300 mA max.) |
| Data output: | 8x 512 channels SPI TTL (Maximum output per port: 680 RGB LEDs / 512 RGBW LEDs / 2048 1-channel LEDs) |
| Ports: | 2x ports (via 2x 4-pin screw terminals) |
| Supported LEDs: | APA101, APA102, APA104, APA106, GW6201, GW6205, LPD1882S, LPD6803, LPD8806, MBI6120, P9883, SJ1221, SK6812, SK6822, SM16703, SM16716, TLS3001, TLS3008, TM1804, TM1809, TM1812, TM1814, TM1829, UCS1903, UCS512B3, UCS8904, UCS9812S, WS2801, WS2803, WS2811, WS2811S, WS2812, WS2812B, WS2813, WS2815, WS2818, WS2822S, WS2822S Addressing (As of July 2018 - see www.madrix.com for the latest information) |
| Ethernet: | 2x RJ45, Auto MDI-X, 10/100 MBit/s (compatible with 1 GBit/s) |
| USB: | USB 2.0, type B port |
| Case: | Non-conductive, IP20, UL94 V-0 flammability rating, designed for 35 mm DIN rails or wall mounting |
| Dimensions: | 92 mm x 70 mm x 45 mm (length x width x height) |
| Temperature range: | - 10 °C to 70 °C (Operating) - 20 °C to 85 °C (Storage) |
| Relative humidity: | 5 % to 80 %, non-condensing (Operating / Storage) |
| Weight: | 0,130 kg |
| Height: | 4,5 cm |
| Depth: | 9,2 cm |
| Width: | 7 cm |
Related products
Kontakt:
☎ 040 320 310
📧 info@cerne-avbelj.com
