MADRIX STELLA
USB and Artnet interface to control two DMX universes with Madrix
MADRIX STELLA is a flexible 2-port Art-Net node to control LED fixtures over DMX512
Is especially suited for solid-state projects as it can be mounted on 35 mm DIN rails or walls via the provided wall mount brackets
Eliminates the need for extra XLR connectors and converters: directly connect DMX512 to the device over two 3-pin screw terminals
Provides flexible power options: over 5 V USB or 5 V to 24 V via screw terminal
Drives up to 2 DMX universes over 2 ports (1024 DMX channels)
Each port can either be configured as output or input
Receives data Ethernet network (Art-Net and/or Streaming ACN) to convert to DMX512 for your LED fixtures
Can also be used as MADRIX USB interface
Works great with the MADRIX Software (sold separately) with quick and easy installation
Sync Mode: MADRIX Software and hardware allow you to synchronize Art-Net data for all output ports and even across multiple devices to get an optimal image on the LEDs without visual interruptions
Complies with the official specifications of Art-Net and Streaming ACN and can be used as regular network unit with other 3rd-party consoles, controllers, or software solutions
Automatic HTP merging for two Art-Net sources
Useful settings for channels per universe, start channel, channel order, and output in case of connection loss, and more
Built-in web page for simple on-device configuration
6 status LEDs, which can be turned off
Non-conductive enclosure with IP20 and UL94 V-O flammability rating
Fanless, noiseless, and low-energy design
Ready within seconds after startup
Recommended for any small or large project
Multiple devices can be used together without problems
The firmware can be updated for future features
Quick start guide / technical manual available in English and German
User manuals also available at help.madrix.com
Made in Germany
More information available at www.madrix.com
Made in Germany
PC connect: USB
Power supply of device: Mains Input Socket (M) fehlt provided
Controller useable for: fehlt
Control: DMX
MADRIX STELLA is a flexible 2-port Art-Net node to control LED fixtures over DMX512
Is especially suited for solid-state projects as it can be mounted on 35 mm DIN rails or walls via the provided wall mount brackets
Eliminates the need for extra XLR connectors and converters: directly connect DMX512 to the device over two 3-pin screw terminals
Provides flexible power options: over 5 V USB or 5 V to 24 V via screw terminal
Drives up to 2 DMX universes over 2 ports (1024 DMX channels)
Each port can either be configured as output or input
Receives data Ethernet network (Art-Net and/or Streaming ACN) to convert to DMX512 for your LED fixtures
Can also be used as MADRIX USB interface
Works great with the MADRIX Software (sold separately) with quick and easy installation
Sync Mode: MADRIX Software and hardware allow you to synchronize Art-Net data for all output ports and even across multiple devices to get an optimal image on the LEDs without visual interruptions
Complies with the official specifications of Art-Net and Streaming ACN and can be used as regular network unit with other 3rd-party consoles, controllers, or software solutions
Automatic HTP merging for two Art-Net sources
Useful settings for channels per universe, start channel, channel order, and output in case of connection loss, and more
Built-in web page for simple on-device configuration
6 status LEDs, which can be turned off
Non-conductive enclosure with IP20 and UL94 V-O flammability rating
Fanless, noiseless, and low-energy design
Ready within seconds after startup
Recommended for any small or large project
Multiple devices can be used together without problems
The firmware can be updated for future features
Quick start guide / technical manual available in English and German
User manuals also available at help.madrix.com
Made in Germany
More information available at www.madrix.com
Made in Germany
PC connect: USB
Power supply of device: Mains Input Socket (M) fehlt provided
Controller useable for: fehlt
Control: DMX
Article code:
51860365
OEM:
0000000050524
Tax rate
22 %
Price with VAT:
462,91 €
We ship in 2-5 days
USB and Artnet interface to control two DMX universes with Madrix
- MADRIX STELLA is a flexible 2-port Art-Net node to control LED fixtures over DMX512
- Is especially suited for solid-state projects as it can be mounted on 35 mm DIN rails or walls via the provided wall mount brackets
- Eliminates the need for extra XLR connectors and converters: directly connect DMX512 to the device over two 3-pin screw terminals
- Provides flexible power options: over 5 V USB or 5 V to 24 V via screw terminal
- Drives up to 2 DMX universes over 2 ports (1024 DMX channels)
- Each port can either be configured as output or input
- Receives data Ethernet network (Art-Net and/or Streaming ACN) to convert to DMX512 for your LED fixtures
- Can also be used as MADRIX USB interface
- Works great with the MADRIX Software (sold separately) with quick and easy installation
- Sync Mode: MADRIX Software and hardware allow you to synchronize Art-Net data for all output ports and even across multiple devices to get an optimal image on the LEDs without visual interruptions
- Complies with the official specifications of Art-Net and Streaming ACN and can be used as regular network unit with other 3rd-party consoles, controllers, or software solutions
- Automatic HTP merging for two Art-Net sources
- Useful settings for channels per universe, start channel, channel order, and output in case of connection loss, and more
- Built-in web page for simple on-device configuration
- 6 status LEDs, which can be turned off
- Non-conductive enclosure with IP20 and UL94 V-O flammability rating
- Fanless, noiseless, and low-energy design
- Ready within seconds after startup
- Recommended for any small or large project
- Multiple devices can be used together without problems
- The firmware can be updated for future features
- Quick start guide / technical manual available in English and German
- User manuals also available at help.madrix.com
- Made in Germany
- More information available at www.madrix.com
- Made in Germany
- PC connect: USB
- Power supply of device: Mains Input Socket (M) fehlt provided
- Controller useable for: fehlt
- Control: DMX
| Power supply: | DC 5 V - 24 V, connection via 2-pin screw terminal or via 5 V USB (USB power supply included) |
| Power consumption: | < 1.5 W during normal operation (300 mA max.) |
| DMX512: | 2x 512 DMX channels, input and/or output |
| DMX512 ports: | 2x ports (via 2x 3-pin screw terminals) |
| Ethernet (Art-Net): RJ45, 10/100 MBit/s (compatible with 1 GBit/s) | |
| USB: | USB 2.0, type B port |
| Case: | Non-conductive, IP20, UL94 V-0 flammability rating, designed for 35 mm DIN rails or wall mounting |
| Dimensions: | 92 mm x 70 mm x 45 mm (length x width x height) |
| Temperature range: | - 10 °C to 70 °C (Operating) - 20 °C to 85 °C (Storage) |
| Relative humidity: | 5 % to 80 %, non-condensing (Operating / Storage) |
| Weight: | 0,130 kg |
| Height: | 4,5 cm |
| Depth: | 9,2 cm |
| Width: | 7 cm |
Related products
Kontakt:
☎ 040 320 310
📧 info@cerne-avbelj.com
