FUTURELIGHT RDM PC Director USB Interface
Compact RDM interface
RDM interface for monitoring and remote control of DMX fixtures compliant with RDM (Remote Device Management)
Easy-to-use PC software for quick analysis and configuration of fixture parameters, i.e. DMX start address, DMX mode, lamp hour count, fixture status
1 DMX universe
USB 2.0, 3-pin XLR connectors
PC software and user manual in the manufacturer's download section
Power supply via included PSU
Made in Europe
PC connect: USB
RDM interface for monitoring and remote control of DMX fixtures compliant with RDM (Remote Device Management)
Easy-to-use PC software for quick analysis and configuration of fixture parameters, i.e. DMX start address, DMX mode, lamp hour count, fixture status
1 DMX universe
USB 2.0, 3-pin XLR connectors
PC software and user manual in the manufacturer's download section
Power supply via included PSU
Made in Europe
PC connect: USB
Article code:
51834860
OEM:
0000000049856
Tax rate
22 %
Price with VAT:
248,71 €
We ship in 2-5 days
RDM stands for "Remote Device Management" and makes remote control of devices connected to the DMX-bus possible. ANSI E1.20-2006 by ESTA specifies the RDM standard as an extension of the DMX512 protocol.
Manual settings like adjusting the DMX starting address are no longer needed. This is especially useful when the device is installed in a remote area.
RDM is integrated in the DMX-protocol without influencing the connections. The RDM-data is transmitted via the standard XLR-line - new DMX-cables are not necessary. RDM ready and conventional DMX devices can be operated in one DMX line. The RDM protocol sends own packages in the DMX512 data feed and does not influence conventional devices.
If DMX splitters are used and RDM control is to be used, these splitters must support RDM.
Manual settings like adjusting the DMX starting address are no longer needed. This is especially useful when the device is installed in a remote area.
RDM is integrated in the DMX-protocol without influencing the connections. The RDM-data is transmitted via the standard XLR-line - new DMX-cables are not necessary. RDM ready and conventional DMX devices can be operated in one DMX line. The RDM protocol sends own packages in the DMX512 data feed and does not influence conventional devices.
If DMX splitters are used and RDM control is to be used, these splitters must support RDM.
Compact RDM interface
- RDM interface for monitoring and remote control of DMX fixtures compliant with RDM (Remote Device Management)
- Easy-to-use PC software for quick analysis and configuration of fixture parameters, i.e. DMX start address, DMX mode, lamp hour count, fixture status
- 1 DMX universe
- USB 2.0, 3-pin XLR connectors
- PC software and user manual in the manufacturer's download section
- Power supply via included PSU
- Made in Europe
- PC connect: USB
Power supply: | 230 V AC, 50 Hz |
via 12 V DC, 1 A power unit included in the delivery | |
Number of control channels: | 512 |
DMX512/RDM connectors: | 3-pin XLR |
USB port: | 2.0, type B |
Dimensions (LxHxD): | 80 x 43 x 50 mm |
Weight: | 0,2 kg |
Power consumption: | 12 W |
Height: | 5 cm |
Depth: | 4,3 cm |
Width: | 8 cm |
DMX channels: | 512 |
Related products
Kontakt:
☎ 040 320 310
📧 info@cerne-avbelj.com